Troubleshooting & FAQsο
LAA Troubleshooting Guideο
TBD β Add troubleshooting and debugging content for customer self-diagnosis
LAA FAQsο
Linaro Automation Appliance LAA FAQs
Device Under Testο
How do I purchase a Linaro Automation Appliance MIB?ο
LAAβs are provided on a loaner basis as part of a Linaro service offering.
Which MIB do I need?ο
This highly depende on the DUT that you want to automate. The Device-Type Enablement guide provides some insights.
Power and Electricalο
What voltage is required for my platform?ο
This is platform dependent. See the manufacturer manual or platform userβs guide.
How is the LAA powered?ο
The LAA can be plugged into a standard 120V or 230V AC outlet. The LAA can be ordered with US, UK, and European plugs.
My LAA shuts down when my DUT is connected and powered on β whatβs going on?ο
Your DUT might be overdrawing current (3β5 Amps), which causes the LAA to shut down to protect itself. Try using another DUT of the same type to see if the issue persists.
Connecting to your LAAο
How do I know the LAA IP Address?ο
This is printed on the OLED display. See the LAA Connectivity
Getting Startedο
How do I register for a ONELab account?ο
Go to the Order LAA
Is my platform compatible with the LAA?ο
Review the Pre-Operational Activities.
How do I set up the LAA?ο
See LAA Connectivity.