SK-AM62P-LP

You don’t need to use any MIB for this device-type. In our setup, we are making use of a No-MIB.

SK-AM62P-LP connectivity

Components

The following components are required to fully automate the board:

  • No-MIB

  • Short RJ45 network cable

  • USB-A male to MicroUSB male cable x2

  • USB-C male to USB-C male cable

  • USB-A male to USB-C male cable

  • Micro SD Card

Connectivity

Automation Interface

Connect a micro-USB cable from LAA Port 3 (facing upward) to the SK-AM62P-LP USB JTAG\XDS port.

USB

Connect the LAA USB OTG port (front facing) to the SK-AM62P-LP USB-A port.

Network

Connect the first ethernet port to the LAA private network interface.

Power

Connect a USB C-to-C cable from LAA Port 1 (facing upward) to the SK-AM62P-LP USB POWER port.

Serial

Connect a USB cable from LAA Port 2 (facing upward) to the SK-AM62P-LP USB UART\Serial port.