# MIBs

In order to connect any DUT to the SIB, the Linaro Automation Appliance uses a
Mechanical Interface Board (MIB) concept.

For each DUT form-factor, a specific MIB is created. The MIB is connected to the SIB via the [SIB header](sib-header.md).
In case only USB connection and Ethernet are required, there is a [No-MIB option](mibs/no-mib.md)

```{toctree}
:caption: Supported MIBs
:maxdepth: 1
mibs/flylead.md
mibs/kv260.md
mibs/rpi-96b.md
mibs/no-mib.md
```